EVOLUTION X INTERCOOLER INSTALL 

Buschur Racing Evo X FMIC Upgrade $759.00
 
 

This is the Buschur Racing FMIC upgrade for the 2008 Mitsubishi Lancer Evolution X.

The cores comes in measuring at 12"H x 4 1/2" W x 18"L which is the largest core offered by any company for the Evo X.

This core when dyno tested has shown a gain 21.3hp and 19ft trq. while keeping intake temps down to a minimum on the Buschur Racing Project X.

The kit will include all couplings, clamps and hardware needed for installation. Some minor modification is needed on the one bracket but the detailed pictures of what needs to be modified can be found in this thread on the Buschur Racing forums. Please copy and paste the link in your web browser. http://buschurforums.com/forum/showthread.php?t=21016

Note: Upper and lower intercooler piping is sold separately

Buschur Racing Evo X 2 1/2" S.S. Upper IC Pipe (Polished) $295.00
 

The Buschur Racing 2008 Mitsubishi Evolution X upper intercooler pipe is made from 2 1/2" mandrel bent stainless steel. Your pipe will arrive to you polished and will include couplings and clamps needed for installation.

Our upper intercooler pipe does have the mounting tab thats located on the front core support. Some competitors pieces do not. This is done for 2 reasons. To hold it in place and keep the pipe from blowing off. You will see a decent gain in HP and Torque as you can see on the below posted dyno graph. Along with the gain in power and torque you will also notice increased throttle response.
 
Buschur Racing Evo X 2 1/2" S.S. Lower IC Pipe (Brushed Finish) $249.00
 

It's a little shorter and much smoother than the stock one. We also were able to relocate the BOV return hose using the stock hose to make it all look a LOT better under the hood. We HATED the factory hose routing it just looked horrible. The tubing is mandrel bent 304 grade SS. The lower i/c pipe (and our upper i/c pipe) both work with the factory FMIC and will work with our FMIC for the car.